Answers:
How accurate is Digi-Planer?
Digi-Planer is
accurate to +/- 0.005 inches overall.
Back to top
What is the power source for Digi-Planer?
Digi-Planer uses 1 SR44 watch battery (included).
Back to top
Can Digi-Planer display
fractions?
No. A fraction to decimal conversion chart can be downloaded
and printed
here. For the very best accuracy and repeatability, use decimals whenever possible.
Back to top
How long is the warranty period?
Digi-Planer is warranted for 90 days.
Back to top
Can Digi-Planer products be used outdoors?
The digital system will give inaccurate readings and/or
error messages if it gets wet. The liquid crystal in the display
will have trouble functioning properly below 35 degrees and above 120
degrees (Fahrenheit scale).
Back to top
How do I shorten the digital scale?
Digi-Planer:
1. Use a blade capable of cutting hardened stainless steel.
2. Saw into the laminate side first.
3. Remove any burrs.
Back to top
How do I get more accuracy, resolution, and/or features?
Our industrial line of products (viewable at
www.proscale.com) has better
accuracy, more features, and is designed for industrial usage.
Back to top
How do I calibrate my Digi-Planer product?
1. Press the ZERO button where applicable.
2. Press the Increase or Decrease buttons to enter an offset.
Back to top
My planer manufacturer is not listed. Do
you sell a retrofit for it?
Only the planers listed have been tested for fit and function.
However, Digi-Planer product can be installed almost anywhere with an appropriate installation bracket.
Back to top
What are the differences between Digi-Planer and
your industrial available products?
Our commercially available products are more accurate, can measure longer
ranges, can display fractions, and are better suited to industrial
machinery and applications, such as near high voltage motors/wiring,
machinery that builds a static charge, and very high use rates.
Your website now indicates this product
is discontinued. When will it be available again?
We are working on another measuring system for planers that is
planned for release during 2008. It will be a product MADE IN USA.
Please
email us directly if you are interested in more information about
it.
